Boss Silicone

Product Price :Get Latest Price

BOSS® PU LM is a polyurethane adhesive sealant that is fast-curing, one-component based and moisture-curing. Once set, it turns into a flexible, durable, and resistant elastomeric seal and has very good adhesion to most industrial materials.

Colours:

This product is available in white, concrete grey, and black.

Packaging:

Available in standard 600 ml sausages.

Features:

 

• Excellent resistance to many chemicals.
• Excellent resistance to UV radiation.
• Permanently elastic after curing.
• Very easy to apply.
• Excellent adhesion on many materials.
Applications:

 

• All usual building joints with high movement.
• Connection joints between windows, doorframes, and walls.
• Expansion joints between many different construction materials.
• Joints with large movement.
• Sealing cracks in brickwork and concrete.

Approx. Rs 98 / BottleGet Latest Price

BOSS® 352 paintable sealant forms a tough, flexible, resilient bond to all building material surfaces. It has excellent resistance to water, weathering, and moisture vapour. It also cures to produce a flexible seal that is non-yellowing and mildew resistant. It is a paintable sealant that is designed for both interior and exterior use.

Colours:

This product is available in white.

Packaging:

Available in standard 290 gms and 450 gms caulking cartridges.

• Effective solution for waterproofing of joints.
• High durability.
• Paintable post-application.
• Permanently flexible post-curing.
• Slump resistant.

• Fills cracks and holes before painting.
• Sealing around plasterboard.
• Sealing around window and door frames.
• Sealing between light partition walls.
• Sealing cracks in brickwork and concrete.
• Sealing low movement joints.

Additional Information:

Product Price :Get Latest Price

BOSS 333 is a ready-to-use, multi-purpose, polyurethane foam that expands to three times its original volume when in contact with air. This volume expansion capability fills holes, cracks, and gaps more completely than standard caulks. The product also has excellent insulating properties and superb adhesion to virtually all building materials.

Colours:

This product is available in Champagne.

Packaging:

Available in a 750 ml aerosol can.

• Excellent stability with a high filling capacity.
• Freon-free.
• Good adhesion on all surfaces (except PE, PP, and PTFE).
• High thermal and acoustic insulation value.
• Excellent bonding properties.

Applications:

• All foam applications in static joints.
• Application of an acoustic baffle.
• Filling of cavities and sealing of all openings in roof constructions.
• Improving thermal insulation in cooling systems.
• Installation of doors and windows.

Product Price :Get Latest Price

BOSS PU 50 is a fast-curing, one-component, moisture-curing polyurethane adhesive sealant, that turns into a flexible, durable and resistant elastomeric seam and has very good adhesion to most industrial materials.

Colours:

This product is available in white and black.

Packaging:

Available in standard 600 ml sausages.

Features:

• Applicable in warm and humid climates.
• Can be painted with all water-based paints and other systems.
• Excellent resistance to many chemicals.
• Good weather and UV resistance.
• High viscosity.
• Medium open time.
• Permanently elastic after curing.
• Excellent primer-less adhesion on many materials such as aluminium, steel, GRP, epoxy coatings, and so on
• Watertight.

Applications:

• Adheres without primer to the most common substrates, such as glass, anodized aluminium, lacquered metal, wood, FRP, and concrete.
• Supple bonding and sealing in the automotive industry, especially on surfaces that vibrate – bus-bodies, caravans, and containers.

Product Price :Get Latest Price

BOSS® 7247 PA is a one-component, solvent-free, ready-to-use, construction adhesive based on polyurethane. It has excellent adhesion, a fast build-up of strength, and fast curing when moistened.

Colours:

This product is available in brown.

Packaging:

Available in a 27 kg pack.

• Flexible adhesive.
• Foams up slightly and fills up cavities.
• Good temperature resistance.
• Moisture and weather resistant.
• Very high final strength.

• Bonding of different foam types like polyether, polyurethane, and polystyrene.
• Bonding of paper, metal foils, felt, textile, cork, wood, chipboard, concrete, masonry, brick, and metal.
• Bonding of rigid plastic panels.
• Bonding of soft and hard polystyrene.
• General bonding applications.

Product Price :Get Latest Price

BOSS® PU 25 is a one-component moisture-curing, polyurethane sealant. It cures into a flexible, durable, and weather-resistant elastomeric sealant that has very good adhesion to most construction and industrial materials. It can accommodate cyclic joint movement of 50% (+/-25%) of the joint width.

Colours:

This product is available in white, grey, and black.

Packaging:

Available in standard 600 ml sausages.

Features:

• Can be painted with all water-based paints and other systems.
• Excellent primer-less adhesion on many materials.
• Excellent resistance to many chemicals.
• Good weather and UV resistance.
• High viscosity with permanent elasticity after curing.
• Ideally suited for application in warm and humid climates.

Applications:

• Can be used as a seam sealer for traditional welding or spot welding.
• Bonding of panels, ACP, roofing sheets, and so on.
• Supple bonding and sealing in the automotive industry, especially on surfaces that vibrate – bus-bodies, caravans, and containers.

Product Price :Get Latest Price

BOSS® 234 High-Tack is a new sealant formulated with Hybrid technology to take the place of most traditional sealants. It is designed to resist all on-the-road flexing and vibrations. It is fast curing, provides permanent elastic adhesion to most surfaces, and is also paintable with a 30-minute drying time with most paints.

Colour:

This product is available in white and black.

Packaging:

Available in standard 600 ml sausages.

Features:

• Can be painted with water-based systems.
• Does not contain isocyanates and silicones.
• Fast curing.
• Good adhesion on moist substrates.
• Good colour stability, weather, and UV resistance.
• Good extrudability.
• High initial tack reducing the need for initial support.
• High shear strength after full cure (no primer).
• No odour.
• Stays elastic after curing and very sustainable.

Applications:

• Elastic bonding of panels, profiles, and other pieces on the most common substrates (wood, MDF, chipboard, etc.).
• Elastic structural bonding in construction, transport, and container industry.
• Sealing and bonding in the building and construction industry.

Product Price :Get Latest Price

BOSS® 232 is a one-component adhesive sealant, based on the hybrid polymer. It reacts with moisture in the air and gradually forms an adhesive with high strength of the elastomer.

Colour:

This product is available in white.

Packaging:

Available in standard 600 ml sausages.

Features:

• Can be painted with water-based systems.
• Ecological advantages – free of isocyanates, solvents, halogens, and acids.
• Excellent adhesion on nearly all surfaces, even if slightly moist.
• Good colour stability, weather, and UV resistance.
• High elasticity – movement accommodation up to ±50% & good extrudability even at low temperatures.
• Ideal for use on sensitive porous or non-porous substrates which are particularly susceptible to plasticizer migration of contamination.
• No bubble formation within sealant in high temperature and humidity applications.
• Excellent mechanical characteristics.

Applications:

• Bonding applications in industrial, construction, and automotive industries.
• Connection joints in sheet metal fabrication, sealing of air conditioning systems.
• Sealing of floor joints.
• Strong elastic bonding constructions that are prone to vibrations.
• Supple bonding in car bodies, caravans, and containers.

Product Price :Get Latest Price

BOSS 532 Color is a high-quality, one-part neutral general-purpose curing sealant that is low odour, and offers unparalleled adhesion and compatibility with a wide variety of substrates and weather durability.

Colours:

This product is available in any RAL Classic colour, customizable according to the client’s requirements.

Packaging:

Available in standard 280 ml caulking cartridges.

Features:

• Excellent adhesion to most common building materials.
• Low-odour.
• Non-corrosive to metal.
• Permanently flexible.
• UV resistant.
• Weatherproof/waterproof.

Applications:

• Ideally suited for general purpose glazing, sealing, and weatherproofing applications.
• Has excellent adhesion to glass, glazed surfaces, anodized aluminum, concrete, cement, wood, and many plastics.

Additional Information:

Product Price :Get Latest Price

BOSS 239 is a high-quality, neutral, one-component adhesive based on hybrid polymer. It has excellent primer-less adhesion to ABS and has good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids, and alkalis.

Colours:

This product is available in white.

Packaging:

Available in standard 600 ml sausages.

Features:

• Can be painted with water-based systems, industrial varnishes, and coatings.
• Combines high-end strength with a certain rigidity.
• Excellent primer-less adhesion on ABS and Stapronas well as on most other materials.
• Free of isocyanates, solvents, halogens, and acids.
• Good weather and UV resistance.
• High initial tack and fast build-up of end strength.
• No bubble formation within sealant in high temperature and humidity applications.
• Excellent mechanical characteristics.

Applications:

• Bonding of ABS parts.
• Elastic structural bonding in automotive applications: buses, trains, trucks, caravans, or trailers.
• Suitable for bonding of (imitation) leather, textile, glass, metal, textile, ABS, Plexiglass, and many synthetic materials, both hard and soft.
• For use in elastic structural bonding applications where a tough and rigid bond is required.

Additional Information:

Product Price :Get Latest Price

BOSS® PU 65 is a fast-curing, one-component, moisture-curing, polyurethane adhesive sealant that turns into a flexible, durable, and resistant elastomeric seam that has very good adhesion to glass, aluminium, most lacquered metal, polyester, stone, etc.

Colours:

This product is available in black.

Packaging:

Available in standard 600 ml sausages.

• Cures to a tough, flexible rubber.
• Excellent weather resistance.
• High elasticity and excellent tear, vibration resistance.
• Non-sag formulation.
• Paintable.
• Primer-less adhesion to metal, glass, and building & industrial materials.
• Tools easily.

• Ideal for bonding the windshield of cars.
• Suitable for bonding various industrial materials for truck & bus-bodies, shipbuilding, sandwich panels, and many other industrial applications.

Approx. Rs 650 / UnitGet Latest Price

BOSS 240 is a high-quality, one-component, solvent-free hybrid adhesive and joint sealant for the installation of windows on all types of vehicles.

Colour:

This product is available in black.

Packaging:

Available in standard 600 ml sausages.

Features:

• Does Not Shrink.
• Flexible.
• Good Sag Resistance.
• Good Weather & UV Resistance.
• High-End Strength.
• High Initial Tack.

Applications:

• Installation of Windscreens in Vehicles.

Product Price :Get Latest Price

BOSS® 238 is a high-quality, neutral, elastic, one-component adhesive sealant for bonding and sealing in the automotive and transport industries based on Hybrid Polymer.

Colours:

Available in black.

Packaging:

Available in standard 600 ml sausages.

• Can be painted with water-based systems, industrial varnishes, and coatings.
• Easy to use and apply under difficult circumstances.
• Excellent adhesion on nearly all surfaces, even if slightly moist.
• Fast cure.
• Free of isocyanates, solvents, halogens, and acids.
• Good weather and UV resistance.
• High elasticity – movement accommodation up to ±20%.
• No bubble formation within sealant in high temperature and humidity applications.
• Short open time.
• Excellent mechanical characteristics.

• Elastic structural bonding in automotive applications: buses, trains, trucks, caravans, or trailers.
• For use in elastic structural bonding applications where a tough and rigid bond is required.
• Joints between metal plates.
• Structural bonding constructions that are prone to vibrations.

Product Price :Get Latest Price

BOSS® 813+ Fire Retardent Foam is a one-component, self-expanding, ready to use PU-foam, which contains HCFC and CFC-free propellants which are not harmful to the ozone layer. The product also has fire-retardant characteristics, according to the European standard EN 1366-4. It has high acoustic insulation properties, in addition to its thermal insulation characteristics.

Colours:

This product is available in pink.

Packaging:

Available in a 750 ml aerosol can.

• Excellent bonding properties.
• Fire-resistant in a joint (EN 1366-4).
• Good adhesion on all surfaces (except PE, PP, and PTFE).
• High filling capacity.
• High insulation value – thermal and acoustic.

• All foam applications in static joints.
• Applying acoustic baffles.
• Installation of fireproof doors and windows.
• Sealing of all openings in roof constructions.
• Sealing of fire-retardant joints in walls, ceilings, penetration seals, and joints.

Product Price :Get Latest Price

BOSS 395 neutral non-corrosive, industrial silicone is a high-performance, one-component adhesive/sealant formulated for industrial and electrical applications. It remains permanently flexible and exhibits excellent adhesion to a wide variety of substrates.

Colours:

This product is available in clear, white, and black.

Packaging:

Available in standard 280 ml caulking cartridges.

Features:

• Excellent adhesion to vinyl, wood, steel, aluminum, glass, and plastic.
• Good resistance to gasoline, engine oil, gear oil, and water.
• Low-odour.
• Neutral cure.
• Non-corrosive.
• Permanently flexible.
• VOC Compliant.
• Waterproof/weatherproof.

Applications:

• Bonding appliance parts.
• Gasketing application in gearbox, engine, and other industrial applications.
• Sealing electrical equipment.

Product Price :Get Latest Price

BOSS 394 neutral non-corrosive, silicone is a one-component, adhesive/sealant, specially formulated for use in general sealing applications.

Colours:

Available in white, black, and clear.

Packaging:

Available in standard 280 ml caulking cartridges.

• Excellent adhesion to vinyl, wood, steel, aluminium, glass, and plastic.
• Non-corrosive, with neutral cure, low-odour, and medium modulus.
• Permanently flexible.
• Waterproof/weatherproof.

• Other bondable surfaces include anodized aluminium, UPVC, wood, ceramics, painted surfaces, and most plastics.
• The product is ideally suited for sealing and bonding with glass, glazed surfaces, and galvanized steel.

Product Price :Get Latest Price

BOSS® 396 neutral silicone sealant is a high-quality, low odour, one-part neutral curing sealant that offers excellent adhesion, compatibility with a wide variety of substrates, and excellent weather durability.

Colours:

This product is available in clear, white, and black.

Packaging:

Available in 270 ml cartridges

Features:

• Excellent adhesion to most common building materials.
• Non-corrosive to metals.
• Permanently flexible.
• Resistant to moisture and temperature extremes.
• Weatherproof, waterproof, and UV resistant.

Applications:

• General-purpose glazing, sealing, and weatherproofing applications.
• Other sealable and bondable surfaces include concrete, cement, wood, and many plastics.
• Sealing and bonding glass, glazed surfaces, and anodized aluminium.

Product Price :Get Latest Price

BOSS® 389+ weatherproofing silicone sealant is a construction-grade sealant that provides unmatched adhesion, weather resistance and can be used on a wide variety of materials. It is a one-part, neutral cure, and low-odour sealant.

Colours:

This product is available in clear, white, black, and grey.

Packaging:

Available in 290 ml cartridges and 600 ml sausages.

• Compatible with all structural silicone sealant.
• Good weather and temperature resistance.
• Medium modulus – with expansion/compression capability up to ± 25% of the original joint width.
• Neutral cure, with a long open time.
• Permanently elastic after curing.

• Ideally suited for weatherproofing, waterproofing, sealing of expansion and control joints, and general-purpose glazing.
• Other bondable surfaces include anodized aluminium, concrete, cement, wood, ceramics, and painted surfaces.
• Works well with ACP, glass, glazed surfaces, and galvanized steel.

Product Price :Get Latest Price

BOSS 122 RTV silicone sealant is a one-part acetoxy cure sealant, designed for general construction sealing applications. Suitable for use on clean metal, glass, different types of wood, silicone resins, vulcanized silicone rubber, ceramic and plastic surfaces.

Product Price :Get Latest Price

BOSS MS 40+ is a high-performance, one-component, hybrid polymer sealant. It takes the place of most traditional sealants and is designed to resist all on-the-road flexing and vibration. The product is fast curing and provides permanent elastic adhesion to most surfaces with excellent elasticity.

Colour:

This product is available in clear.

Packaging:

Available in 290 ml cartridge, 600 ml sausage, and 250 kg drum packs.

Features:

• Can be painted with water-based systems within 30 minutes.
• Ecological advantages – free of isocyanates, solvents, halogens, and acids.
• Excellent adhesion on nearly all surfaces, even if slightly moist.
• Good colour stability, weather, and UV resistance.
• Good extrudability even at low temperatures.
• High elasticity.
• Ideal for use on sensitive porous or non-porous substrates, susceptible to plasticizer migration of contamination.
• No bubble formation within sealant in high temperature and humidity applications.
• Very good mechanical characteristics.

Applications:

• Bonding applications in industrial, construction, and automotive industries.
• Connection joints in sheet metal fabrication, sealing of air conditioning systems.
• Sealing of floor joints.
• Strong and elastic bonding in constructions that are prone to vibrations.
• Supple bonding in car bodies, caravans, and containers.

Additional Information:

Product Price :Get Latest Price

BOSS 236 is a high-quality, neutral, elastic, one-component adhesive sealant based on MS-polymer with a very high initial tack.

Colours:

Available in white, black, and grey.

Packaging:

Available in standard 600 ml sausages.

• Can be painted with water-based systems.
• Does not contain isocyanates.
• Fast curing.
• Good adhesion on slightly moist substrates.
• Good extrudability.
• Good weather and UV resistance.
• High initial tack reducing the need for initial support.
• High shear strength after full cure (no primer).
• No odour.
• Stays elastic after curing and very sustainable.

• Elastic bonding of panels, profiles, and other pieces on the most common substrates.
• Structural bonding applications in the automotive industry (cars, coaches, caravans, marine, and trains).
• Structural elastic bonding in building and metalworking industry.

Additional Information:

Product Price :Get Latest Price

BOSS 395AF is a single component, neutral antifungal silicone sealant which vulcanizes on exposure to moisture in the air at room temperature, to produce a flexible elastomeric sealant. It is suitable for all common construction and glazing application. It is easy to apply and offers excellent adhesion to a variety of non-porous substrates such as glass, glazed ceramic tiles, and aluminium. It is resistant to ozone, ultra-violet radiation, and temperature extremes.

Colours:

Available in Travertine, Mushroom, Slate Grey, Magnolia, Teak, Clear, Black, White, and Off-White.

Packaging:

Available in standard 300 ml caulking cartridges.

• Almost no smell.
• Colourfast and UV resistant.
• Contains fungicide.
• Excellent adhesion to vinyl, wood, steel, aluminium, glass and plastic, bathtubs, closets, washbasin, and so on.
• Non-corrosive, neutral cure, low-odour & medium modulus.
• Permanently flexible.
• Stays elastic after curing.
• Very easy to apply; flows readily from the container.
• VOC Compliant.
• Waterproof/weatherproof.

• Ceramic applications such as joints between wall and floor tiles.
• Doors and window sealing.
• Ideal for application in all areas that are prone to mould and mildew formation.
• Sealing around shower cubicles and joints in and around sanitary fittings.
• Sealing around washbasins, bathtubs, kitchen sinks, and counters.

Product Price :Get Latest Price

BOSS 354 is a high-quality joint and insulation sealant that has superior bonding strength and anti-bacterial properties. It provides a long-lasting, permanently flexible seal that can be used in internal and external sealing around window and door frames. The product exhibits good primer-less adhesion to concrete, plaster, brick, stone, masonry, aluminium, glazed tiles, metals, painted surfaces, coated or uncoated wood, and some plastics. The antibacterial properties protect the sealant from tarnishing and maintains elasticity after drying.

Colours:

This product is available in white.

Packaging:

Available in standard 280 ml caulking cartridges.

• Easy to apply and good adhesion on many porous construction surfaces.
• Flexible crack filler before painting jobs, for sealing construction frameworks.
• Joint movement up to 15%.
• Paintable post-application.
• Waterproof, weatherproof, and aging-resistant.

• Filling common connection slots during construction.
• Installing and sealing uPVC windows.
• Plasterboards, drywall panels.
• Sealing the gap between the door frame and wall, foot baseboards & floor, and brick slots.

Additional Information: